Sta-Rite EC240120T Effluent Pump
Our best, the EC2 Series submersible pumps are constructed of rugged cast iron, with a non-clog vortex impeller typically used in septic tank effluent applications.
Key Features:
- HP - 4/10
- Amps. - 12.5
- Volts - 115
- Cycles - 1/60
- Cord Length - 20
- Switch Type - Tethered
Specifications:
MAXIMUM CAPACITY: 62 GPM
MAXIMUM HEAD: 32'
HORSEPOWER: 4/10 HP
VOLTAGE: 115 Volt,60 Hz.
AMP DRAW: 12.5 amps at full flow
SWITCH: Tethered float, On: 14" / Off: 5"
MOTOR: 4/10 HP (1550 RPM); Shaded pole with thermal overload
BODY: Cast Iron and Fiberglass reinforcedNoryl® with threaded brass insert
IMPELLER: Fiberglass reinforced Noryl® with threaded brass insert
SHAFT SEAL: Mechanical, carbon/ceramic
BEARINGS: Upper sleeve and lower ball bearings, oil lubricated
EXTERIOR HARDWARE: Stainless steel
MAXIMUM LIQUID TEMPERATURE: 130°F (55°C)
POWER CORD: 20' water resistant 16-3 gauge, type SJTW-A/SJTW with integrally grounded 3-prong plug
